THIS PRODUCT IS ONLY AVAILABLE FOR MIAMI-DADE
AT CHECK OUT CHOOSE FREE PICK UP
Valen Rev+ Fat Tire Electric Bike
Step Through & Regular
All terrain. Any adventure. Always down.
Off-road trails, tough-as-nails, wind in your sails. Whatever your thing is, Valen Rev+ is the only ebike that can match your boldness and accept the same challenges you would. Fully equipped with a powerful, integrated 720Wh battery, 750W motor, and range of up to 68 miles per charge, this do-it-all ebike can handle your longest, farthest, and most daring adventures. Pedal as much or as little as you’d like with a full throttle and 6 levels of Pedal Assist that can propel you up to 28mph; and with 4” puncture-protected fat tires and a 100mm suspension fork, you’ll effortlessly glide over any terrain as if the bumps and cracks aren’t even there. Feel free to blaze your own trails – roads are merely suggestions.
Specifications
Frameset
- Sizes 1 size 20″
- Material Valen 6061 hydroformed aluminum with, integrated downtube battery and replacable derailleur hanger.
- Fork Triple Clamp with 100mm of travel
Wheelset
- Rims 20″ single-wall aluminum 36H, for disck brake with cut-outs
- Hubs F: Aluminum bolt-on with 17mm axle nuts. 36 hole
- Spokes 13G w/brass nipples
- Tires 20 x 4.0 Fat MTB with puncture protection and reflective sidewall
E-Power System
- Motor 750W rear hub
- Battery 720Wh/48VLG 21700 cells; Charge on or off bike
- Display Center mounted color LCD
- Charger 48V/2A
- 48V/750W range Up to 68 miles
- Pedal Assist 6 Levels, Throttle and walk-mode
- UL Testing UL2849 & UL2271 Certified
Drivetrain
- Rear Derailleur 8 speed Shimano Altus
- Shifter 8 speed Shimano Rapidfire Plus
- Crankset 3-Piece aluminum w/steel 38T chainrings with double alloy chainguard
- Chain KMC 8 speed
- BB Sealed cartridge
- Freewheel/Cog Shimano 8 speed 11-34T
Components
- Headset Threaded, steel, 1 1/8″ (28.6mm)
- Brakes Tektro Hydraulic with 180mm ebike specific rotors and semi-metallic pads
- Handlebars Steel BMX style
- Grips Lock-on comfort grips.
- Stem BMX Die Cast Alloy 22.2mm clamp
- Saddle Retrospec Custom 2-piece Moto
- Pedals Alloy Platform
Extras
- Kickstand Alloy chainstay mount
- Bottle Cage Alum alloy
- Item Weight 72 lbs (battery included)
- Recommended Weight Limit 350lbs
Sizing
How to measure my inseam for a bike
Your inseam can help you find the perfect sized bike (measuring it properly is similar to pant inseams but measured a little differently). Here’s how they work:
- Stand upright with your feet 6-8″ apart.
- Using a tape measure or tailor tape, measure from the bottom of your foot to the top of the inside of your leg.
- Compare your inseam measurement to the standover height of the bike. You should have about an inch of space between your body and the top tube.
- ARider Height
- BInseam
- CTop Tube

Size | Height Range | Standover Height |
20″ | 30.5″ |
Features
Please note:
All sales final. We do not accept returns for this unit. We would cover components that are defective from factory under manufacturer warranty.