FREE ASSEMBLY FOR MIAMI!
&
SAME DAY DELIVERY AVAILABLE!
At check out choose “Free Local Miami-Dade pickup For Retrospec Fully Assembled Bikes”
IMPORTANT NOTICE:
THIS BIKE IS ONLY AVAILABLE FOR FREE PICK UP IN MIAMI, FL, FOR FULLY ASSEMBLED BIKE + DELIVERY CHARGE. PLEASE SEE CHECK OUT FOR DELIVERY OPTIONS
About this item
FRAMESET
- Sizes 26″ x 457mm/45cm/18″;
- Material: Alloy, 6061 TIG welded
- Dropouts 2x rear dropout eyelets, 1x rear fender eyelet, rear rack mounts
- Fork Steel, 28.6mm/1 1/8″ Threaded for Quill, TIG welded, 2x eyelets
WHEELSET
- Rims Alloy double-wall, 26″ x 36H x 13G
- Hubs F: Alloy bolt-on, R: Hub motor bolt-on
- Spokes 13G UCP w/brass nipples
- Tires 26 x 2.40, S/V, Wanda
E-POWER SYSTEM
- 36V/350W Motor Brushless rear hub motor, 9-pin connector. MXUS
- Drive Mode, Display PAS/thumb-push throttle-Left side, speed sensor, LED handlebar-mount display panel w/6 assistance levels, w/Start-Aid 6kph (~4mph). Bigstone E300 Display Head.
- Charge Time (empty to full)Â 10.4Ah battery (350 & 500W): 5-6 hours
- 36V/350W range up to 28 miles
DRIVETRAIN
- Rear Derailleur Shimano Tourney 7S
- Crankset Prowheel 170mm x 42T, alum arms, steel chainring, no logos
- Chain KMC 3/32″ x 118L
- BBÂ Steel sealed cartridge, 68mm x 126mm
- Freewheel/Cog Shimano 7-speed 14-28 (14-16-18-20-22-24-28)
COMPONENTS
- Brakes JAX Mechanical disc Front & Rear, 160mm (Model JAX-8, brake pads #YK-34)
- Handlebars Alloy low-rise, 680mm width
- Grips Comfort grips (for GripShift)
- Stem Alloy quill, single-bolt
- Saddle Retrospec Comfort w/springs
- Seatpost Alloy w/integrated micro-adjust clamp, 28.6 x 300mm
- Seatpost Clamp Alloy QR
- Pedals PP platform, loose-ball 9/16″
EXTRAS
- Kickstand Rear mount, adjustable, aluminum alloy
- Rear Carrier Steel. Battery holder & carrier, elastic tie-down strap
- Bell Alloy
- Light(s)Â Front (4x AAA) + Rear (2x AA), batteries included
- Fenders Steel fenders w/alloy stays
- Chaincover Full coverage/length, steel
- Tools 4 pcs: 15mm open/box, 10mm open/box, 5/6mm hex key, cross (Phillips) screwdriver
- Recommended Weight Limit 220lbs
- Item Weight 58 lbs (battery included)
- A.Rider Height
- B.Inseam
- C.Top Tube
| Size | Height Range | Standover Height |
| Frame: 18″ | 5’6″-6’4″ | 31″ |
How to measure my inseam for a bike
Your inseam can help you find the perfect sized bike (measuring it properly is similar to pant inseams but measured a little differently). Here’s how they work:
- Stand upright with your feet 6-8″ apart.
- Using a tape measure or tailor tape, measure from the bottom of your foot to the top of the inside of your leg.
- Compare your inseam measurement to the standover height of the bike. You should have about an inch of space between your body and the top tube.
